Supernova E3Schmidt SON tail light bracket – Medium

sku # silver = SN-FS-M

****** Please note that these brackets now have a rougher finish – they almost look galvanized. The shiny finish was too hard to consistently obtain and was a serious bottleneck in our production.******

It has come to our attention that there is a new Supernova tail light that does not use the 50mm bolt spacing. If you have aSupernova tail light, make sure that your spacing is 50mm before ordering.

While our tail light brackets were designed specifically forthe contours of the Supernova E3 tail light, the 50mm hole spacing is an EU standard and works for a wide variety of lights, including manyBusch & Mller tail lights and the Schmidt SON tail light for racks. Measure your light and if it has 50mm bolt spacing, it will likely work!

With a 90 degree bend, this medium bracket for50mm bolt spacing bicycle tail lights is designed for standard rear racks and longtail decks. Light bolt holes and attachment holes are M5. Made from highly weather resistant 5052 aluminum.

Please note that the black version shown in the video is no longer available.

If you are a bike shop or frame builder with a business license and insurance, please contact us for information on wholesale prices.

13g –Weightisbased on a representative sample. Actual weightmay vary slightly.

Made in Oregon, USA.